The MKH50-P48 is an RF Super-Cardioid Condenser 48V Phantom Powered Microphone, with -10 dB pad and switchable bass attenuation (-4 dB @ 50 Hz) supplied with MZQ40, MZS40, MZW41.
The super-cardioid MKH 50 offers a higher attenuation of diffuse-field and lateral sound than the cardioid microphone. It is principally designed for use as a soloist’s or spot microphone for applications requiring a high degree of side-borne sound muting and feedback rejection. The directional characteristics are frequency-independent. MKH Series microphones require external power for operation, supplied by input equipment (mixer, recorder, etc.) or by one of several accessory power supplies offered. Microphones are weather-resistant, and therefore ideal for location recording in any environment. All MKH models are low-impedance, balanced output, terminating in a standard 3-pin XLR connector (5-pin XLR on MKH418S).
Features:
- High rejection of lateral sounds
- Exceptionally low inherent self-noise
- Transformerless and fully floating balanced output
- Symmetrical transducer technology ensures extremely low distortion
- Switchable roll-off filter to compensate for proximity effects at a distance of approx. 0.5 m
- Switchable pre-attenuation
- Black, anodized light metal body
Transducer | Condenser |
Polar Pattern | super-cardioid |
Frequency Response | 40Hz to 20kHz |
Dynamic Range (Typical) | Not Specified by Manufacturer |
Signal-to-Noise Ratio | 12 (18) dB |
Maximum Input Sound Level | SPL 134 (142) dB at 1 kHz |
Power Requirements | 48 V Phantom Power +/- 4V |
Output Impedance | Nominal: 150 ohms Min. terminating: 1000 ohms |
Output Connectors | 3-pin XLR male |
Pad | -10dB |
Low Frequency Roll-Off | Yes |
Dimensions | 6.02 x .98" (153 x 25mm) Length x Diameter |
Weight | 3.52 oz (100g) |
Write a Review
×